Name:

Full Name

Phone Number:

Address:

Parcel Number:

Email:

Agricultural (AG) Project Checklist:

AG Project Calculations:

Step 1:  Determine the total area to be managed (ft2) including roof, driveway, walk, patio and/or other impervious area.

Deed Area for Site (acres):

Length(ft)

Width(ft)

Impervious Area(ft2)

Length(ft)

Width(ft)

Impervious Area(ft2)

Length(ft)

Width(ft)

Impervious Area(ft2)

Length(ft)

Width(ft)

Impervious Area(ft2)

Length(ft)

Width(ft)

Impervious Area(ft2)

(a) Sum of all impervious area

(a) Subtract any impervious area being removed

*Total area to be managed (a) – (b)

Area Remaining (ft2)

Owner Acknowledgement – I declare that I am the property owner and that the information provided is accurate to the best of my knowledge.  I understand that stormwater may not adversely affect adjacent properties or be directed onto another property without written permission.  I also understand that false information may result in a stop work order or revocation of any associated permits.  Township representatives are also granted reasonable access to the property for review and/or inspection of this project as necessary.

Signature:

Clear

Date:

Development Sites Containing Agricultural with Conservation Plan:

Where a Development Site is located within the Agricultural Zone (A) and has an implemented conservation plan approved and verified by the Conservation District, the submission of proof of the implemented conservation plan shall be considered compliance with this Chapter for installation of impervious surface coverage where all of the following criteria are met. 

(2)	For a parent tract containing not less than 10.5 acres to 20 acres, cumulative new impervious areas of 10,000 square feet or less if the applicant can provide documentation from a Qualified Person that the storm water flows from the parent tract leave the parent tract in the same manner as the pre-development condition and that there will be no adverse effects to adjacent property or that the flows reach a natural drainageway or existing SWM Facility before affecting adjacent property.

(3)	For a parent tract containing not less than 20 acres, cumulative new impervious areas of 20,000 square feet or less if the applicant can provide documentation from a Qualified Person that the storm water flows from the parent tract leave the parent tract in the same manner as the pre-development condition and that there will be no adverse effects to adjacent property or that the flows reach a natural drainageway or existing SWM Facility before affecting adjacent property.

(4)	An applicant for processing under this Section shall provide the Township with information to demonstrate there shall be no disturbance of land within floodplains, wetlands, environmentally sensitive areas, riparian forest buffers, or slopes greater than 15 percent.

Please Upload All Applicable Files

Maximum file size: 516MB

Recent Posts

Upcoming Events

Board of Supervisors Meeting

Zoning Hearing Board Meeting

Board of Supervisors Meeting

Agricultural Project Stormwater Application

HOURS & LOCATION